Skip to main content

Build a crop plan from scratch

Assign a crop, add activities and products, and see how the seeding pass sets the paddock's crop.

P
Written by Phase Team

Use this to set up a plan by hand in Crop Plan Studio (the Plan page), for one paddock or many at once: give them a crop and variety, then add the sprays, seeding, spreading and other passes with their products and rates. If this season mostly follows last season, Start from last season or copy a plan is quicker.

Before you start

  • Your paddocks must be mapped. If not, add or import them in More → Paddocks & crops → Farms & Fields.

  • You need permission to edit crop plans. Owners and admins always have it; staff and advisers have it unless the owner turns it off. If Add is missing, see "If something doesn't look right" below.

  • Open the Studio: on a computer select Plan; on a phone select More → Paddocks & crops → Crop Plan Studio.

  • Check the season in the top bar. Everything you add goes on that season.

Select the paddocks

To give several paddocks the same program, select them all before you add the crop or activities.

  1. For one paddock, tap it on the map.

  2. For several, turn on Select (the pointer icon) in the top bar and tap each paddock (or a crop in the legend). On a computer you can Shift-click instead.

  3. Select Done.

For example, select North 1, North 2 and North 3 before adding their knockdown, and Phase adds it to all three plans at once.

Give the paddocks a crop

  1. With the paddocks selected, find the crop question. One empty paddock asks, for example, "What goes in here in 2027?". For several paddocks, select Details on the crop line (it reads No crop assigned) and use Assign a crop.

  2. Select one of your farm's crops, or select Other crop, type the crop and select Set. Other crop suggests Phase's standard crop names and tidies a typo, so "Barely" and "Barley" are the same crop to reports. On one paddock, Not cropped beside the crops marks it out of the program instead.

  3. Check the preview over the map and select Apply to N paddocks (for example Apply to 3 paddocks).

A crop on its own is enough to colour the map. The passes can come later.

Set the variety, or change the crop

  1. Select Details on the crop line, then Change beside the crop's name.

  2. For the variety, select Set variety (or Change) beside Variety.

  3. Type a few letters and pick from the Phase library's varieties for that crop. Each shows its breeder and herbicide-tolerance package. A variety not in the list is kept as typed when you select Set.

  4. To change the crop instead, pick a crop under Change crop, or Other crop.

  5. Check the preview and select Apply to N paddocks.

  6. Select Done beside the crop's name.

This sets every selected paddock in one go, and every seeding pass on their plans too, done ones included. The preview says so, for example "2 seeding passes (1 done) also set to Barley · Combat", and Undo puts them back. If the selected paddocks need different crops, do one crop group at a time.

Add a pass

Add, at the foot of the panel (and of a paddock's Plan tab on the map), opens one card that asks one question at a time. Each step's Next says where it goes, and everything the full form asked is in the card.

  1. Select Add.

  2. What kind of pass? Tap Spray, Spread, Seeding, Apply, Tillage, Harvest or Operation, or Cost for a cost on its own (cartage, a levy, contract work). More details holds Start from: a saved activity, a pass from one of your crop templates, or a pass already planned on another paddock this season. Tap one and the card fills in the kind, the details and the products with their rates, then moves to the date for you to check.

  3. When: tap or slide the strip of days, or Pick from a calendar. A pass has one date, not a window.

  4. Details: for a spray, the water rate, droplet size, nozzle, method and target; the method, rate, harvest step and yield for the other kinds. More details holds pressure, speed, Only if it is needed (with what it goes ahead on and a day to look at it again) and a note.

  5. What goes on it: Product (search by name, brand or active, with type chips, recently used first at their last rate and $/ha), Equipment and Cost. Each line has − and + beside its rate. For a seed in kg/ha, More details works the sowing rate out from plants per square metre; for a fertiliser, it shows what the rate puts on.

  6. Check: the ticket sums up the pass. Assign to (optional) gives it to someone as a job. Select Add to the plan.

The card says what was added ("Spray added · 14 Sep · North 1"), and Phase writes it to every selected paddock with no second ask. An empty paddock's Add a pass card opens the full Add activity window instead, with Apply a template, Copy from a paddock and Use a saved activity on its first step, Next: when and Save pass.

Add products, seed and machines

  1. Select Add product (or Add seed). Every product you have planned before shows the rate and price it had last time, and where, for example "Last used on Tank Hill, 14 Apr · 180 L in stock".

  2. Narrow the list with the chips (All, Herbicide, Fungicide, Insecticide, Adjuvant, Fertiliser, Seed), or type a product name, brand or active ingredient.

  3. Tap the product. One you have planned before goes straight on at its last rate. A product with no history asks for its Rate and price first, filled in where Phase can, and the button says what it will do, for example Add MAP at 80 kg/ha.

The rate stays editable on the pass. A product's price starts at Inventory's current price, and the plan follows Inventory until you change it. A price you change on the plan is for this plan only; Inventory isn't changed.

Each line shows the actives (for a chemical) or the analysis and kg/ha of each nutrient (for a fertiliser). Change a rate, unit or price on the line rather than removing it. Beside the add buttons are the pass's $/ha, the total over the selected paddocks, and the N, P, K and S it adds up to.

A product that isn't in the list. Type its name and select Add "name" as a new product, then fill in Product name and Category. Leave Add it to my product list ticked to add it to Inventory, so it can be costed and reused. Untick it to keep it on this plan as a name only, with no cost and no stock. Linking plan lines to the right Inventory product is what makes demand, costs, labels, safety data sheets and John Deere matching work.

Machines and other costs. Add machine lists your fleet with the running cost and diesel each machine had last time; one tap adds it. Add cost does the same for costs such as cartage or contract spreading, at their last amount. Both have a way to add one that isn't in the list. See Add notes, machines and other costs to a job.

Sprays. Droplet size, nozzle and the rest are in the open pass's details panel, under the water rate. See Set up a spray: nozzles, droplet size and Fill Assist.

Add a seeding pass

  1. Select Add, tap Seeding and set the date. More details on the details step holds the crop and variety, which are otherwise read from the seed.

  2. On What goes on it, add the seed. Library seed comes with its variety, breeder and herbicide-tolerance package, and fills Crop and Variety for you.

  3. Check the seed line's rate. This is the sowing rate: reports, Reconcile and the paddock sheet all read this number.

  4. Select Add to the plan.

To work out a rate from plants per m², see Set rates by units of N, plants per m² or a season target.

Check your work

  1. Open one or two of the paddocks and read the activity card again.

  2. Check that 500 mL/ha hasn't gone in as 500 L/ha.

  3. Check the activity is on the season you meant.

If something is wrong, select Undo in the top bar, or fix the line and select Save.

Where the paddock's crop comes from

The seeding pass sets the paddock's crop. Give a seeding pass another crop or variety, or another seed, and the paddock's crop, variety and rotation for the season change straight away. This works for planned, done and resown passes, in the Studio and on the Plan tab. Change history lists it, for example "Crop set to Barley Combat from Seeding". Library seed counts as its library variety. A generic seed such as "Wheat seed" gives the crop and keeps the variety the pass names. With two seeds on a pass, the first names the crop and variety (see Plan a seed mix or a pasture sown under the crop).

Nothing else moves a saved crop. Changing a sowing rate or notes, editing a spray, reopening work, deleting a seeding pass (even the last one) or editing a product in Inventory leaves the crop alone. On the Plan tab, editing a seeding pass's date or notes keeps its crop, variety and sowing rate.

Marking a seeding pass done with different seed asks first. If the seed recorded is another crop or variety, Phase asks Update the paddock's crop for 2026?, for example "North 1 is planned as Wheat, Scepter. The seed recorded is Barley, Spartacus CL." The same happens when you confirm a John Deere seeding job. Update crop changes the paddock's crop, rotation and the pass to what was sown, and it shows in Change history. Keep the plan, or closing the question, changes nothing. Only people who can edit crop plans are asked.

A crop with no seeding pass. A paddock's crop is whatever its plan is saved as. A paddock planned as Fallow or Pasture, or allotted a crop before its work is planned, shows that crop on the paddock sheet, the Map and the Overview's crop area card. You don't need a seeding pass for that. A plan with no crop and no seeding pass reads Crop not set.

When the crop and seed disagree. Under Change, a line says where the crop came from, for example "Crop set by Seeding, Wheat Scepter, 15 May". A disagreement shows as an amber line straight away: a pass saved as one crop with another crop's seed, two seeding passes sowing different seed, or a plan whose seed says another crop. The plan keeps what it says until they agree. A link such as Use Barley Combat takes the seed's crop through the usual preview.

Programs for another crop. Replace planned with another crop's program makes the paddock that crop, and the preview says so ("1 paddock becomes Canola (from Wheat)"). Adding a program alongside existing work never changes the crop. Ask Phase moves the crop the same way.

Good to know

If something doesn't look right

  • Add is missing. You don't have permission to edit crop plans, and the Studio shows "View only: you don't have crop plan editing access". Staff and advisers have it unless the owner turns it off; View only members never do. With it, staff can create and edit plans and activities, copy activities and whole plans, and save and apply templates. Ask the owner to check your role (see Change someone's role and what they can see).

  • Add is still missing after your role was changed. Refresh Phase, or sign out and back in. Check you are on the right farm and season, your membership is active, and the farm's subscription or trial is active. Still missing? Contact Phase support with your name, farm, paddock, season and a screenshot.

  • It only lets me select one paddock. Turn on Select in the top bar, or Shift-click on a computer.

  • I can only change the variety, not the crop. Open Details on the crop line: Change crop is under Change beside the crop's name, below Variety. Changing the seed on the seeding pass also changes the crop. If neither shows for someone who can edit plans, contact Phase support.

  • No varieties appear. If the list stays empty for a common crop such as wheat, contact Phase support. You can still type the variety.

  • The variety keeps going back, or shows twice. The seeding pass sets the variety. Select the paddocks, then Details → Change → Change beside Variety, and pick the one variety. This sets every seeding pass too.

  • Planned as barley, but the seeding pass has wheat seed. Select the amber line's Use … link, or use Change crop.

  • My fallow paddock says Crop not set. The plan has no crop saved. Give it the crop Fallow on the crop question (Other crop if it isn't listed), or with Assign a crop under Details. A seeding pass added only to make it read as fallow can be deleted.

  • I'm looking for Create plan or No crop plan yet. Since 6 November 2026 an empty paddock opens on one start: the crop question and the Add a pass, Apply a template, Copy from a paddock and Start from last season cards.

  • Two varieties in one paddock. Put both seeds on its seeding pass; the first names the paddock's variety. To make it two paddocks for good, split it (see Merge, split or delete a paddock). A split can't be for one season only.

  • "Crop plan needs review". That paddock's John Deere work sits on a hidden imported-actuals plan Phase can't safely turn into this season's plan (two of them, or one filed under the season written differently). Phase skips it with "Review it on the paddock first; nothing was changed here." and changes the rest. If it keeps happening, contact Phase support with the paddock and season.

  • An activity is in the wrong season. See "Move a planned activity to another season" in Save and apply plan templates.

Related

Did this answer your question?