1. In The Kit

Davros Pro

Steel Bush/Thread Adapter

2. Installation

The base of the Davros Pro has a 3/8' -16 UNC female thread that allows the body to be screwed directly onto the male thread of the tripod mount, or any other compatible device.

Sometimes manufacturers use a slightly smaller 1/4"-20 UNC thread. In this case, we supply a small steel bush that threads into the Davros, which reduces the female thread size. These are the two most common sizes of thread that are used internationally in the camera and optics world.

3. Operating Instructions

Attaching your rifle

In order to attach your rifle to the Davros Pro head, you will need one of our Classic Adapters mounted to your rifle.

To attach your rifle to the Davros Pro, simply locate the spigot into the slot on the adapter. The magnet will ease this process. To remove the rifle from the Davros Pro, firmly pull the rifle upwards from the spigot. Sometimes it can help to push up the underside of the stock with your thumb.

Attaching your optics

Our range of optics adapters will allow you to mount spotting scopes, binoculars, cameras & other devices with standard photographic 1/4-20 UNC or 3/8-16 UNC threads to your Davros Pro head.

Main Locking Knob

Loosen the main locking knob, adjust your optic to the desired position, and then tighten the locking knob to hold the optic in place. Depending on the weight of the rifle and the positioning of the adapter on your stock, it may be possible to lock the rifle in position whilst you wait.

Friction Control Knob

The friction control knob allows you to set the friction of the ball joint. This is down to personal preference of where you find the most stability, although heavier rifles or optics may require a higher level of friction to ensure stable and smooth control.

Pan Locking Knob

Loosen the pan locking knob by turning anticlockwise and rotate the head to adjust the panning position.

4. Compatible Accessories

Classic Adapters

In order to attach your rifle to the Davros Pro head, you will need one of our Classic Adapters mounted to your rifle.

Heavy Duty Optics Adapter

Turns your Davros head into a super stable optics and camera platform in seconds. The magnetic attachment system gives instant fitting and has an adjustable lever system for extra security.

Light Duty Optics Adapter

Enables you to use your Davros head with lightweight cameras, spotting scopes, binoculars or anything else with a ¼”-20 thread.

Did this answer your question?