Why This Matters
These settings help ensure your proposals accurately reflect energy production and consumption data. Getting them right means more accurate savings estimates and more confident customers.
What You'll Need
Admin access to SubcontractorHub
A web browser (Chrome or Edge recommended)
Step-by-Step Instructions
Step 1
From the main menu, open your profile and select“Settings”.
Step 2
Go to the Incentives/Financing section and click the edit button located across from“Action”.
Step 3
Toggle“Enable Offset Limit” on and set the offset limit value in the field below. Then click“Update” to save. Note:If the offset of a solar installation is above the maximum offset limit value, an error message will appear when attempting to finance the proposal as shown in the image below.
Real-World Example
💡 A solar designer enables the consumption profile requirement to ensure every proposal includes real usage data — resulting in more accurate savings estimates that customers trust.
Pro Tips
Start small: Test this feature on one project before rolling it out company-wide.
Need help? Contact SubcontractorHub support — they're always happy to walk you through it.
Bookmark this guide: Come back anytime you need a quick refresher.
Troubleshooting
Problem | Solution |
Setting doesn't appear | Make sure you have admin access and the correct permissions enabled. |
Changes not saving | Refresh your browser and try again. Check your internet connection. |
Feature not working as expected | Clear your browser cache or try a different browser. Contact support if the issue persists. |
Change Log
Date | Change |
May 2026 | Rewritten for clarity; simplified language for non-technical contractors; added images and troubleshooting. |