Power off the panel.

On the remote, press Mute, 1, 8, 2.

Power the panel back on to access the Options menu.

Select Options, then select Factory Reset.

Power the panel back on after it turns off.

Connect the network cable to the RJ45 port (recommended for wired connections).

Connect the power cord.

Press the Power button on the remote.

Select the appropriate language and press Enter.
​
​

​
​

Select OK to accept the Privacy Notice.
​
​

​
​

Select Manual Setup and press Enter.
​
​

​
​

On the Display Orientation screen, select Landscape or Portrait based on configuration requirements. DO NOT select Auto.
​
​

​
​

Select MagicINFO S Player and press Enter.
​
​

​
​

Select Skip on the RM Server screen.

Set the correct date and time, then select Next. Incorrect date and time settings prevent the unit from going online.

Select Next to skip PIN setup.

Exit the MagicINFO screen after installation completes.

Press the MENU button on the remote.

Select System and press Enter.
​
​

​
​

Select Play Via, then change it to Custom App.
​
​

​
​

Press the Home button and select App Management.
​
​

​
​

Select Install Custom App.
​
​

​
​

Enter the following URL using lowercase letters: https://engage.delphidisplay.com/setup

Select Go to install the application. If the application does not automatically load, please check the URL that was entered earlier.
​
​

​
​

If everything worked, you would see the screen below. Select Advanced Mode.
​
​

​
​

Verify the URL displays as https://engage.delphidisplay.com.

Navigate to the License field and enter the provided Player License on your Sales Order.

Select Activate.

Confirm the player appears as active (green or yellow) in Engage CMS.

If the app closes, press Home and reopen the unnamed app next to App Management.

If needed, perform a factory reset using the same reset procedure.
​
​