Why This Matters
Learning this workflow helps you get more done in less time with SubcontractorHub. Follow these steps and you'll be set up in minutes.
What You'll Need
Admin access to SubcontractorHub
A web browser (Chrome or Edge recommended)
Step-by-Step Instructions
Step 1: Follow the steps below to request a re-design for solar proposals designed
This feature is available for proposals in the “Design Completed” stage.
Step 2: Click“View Detail”on the proposal card.Step 2:
Step 3: Click“Re-design Request”.Step 3:
Step 4: Enter a comment for the Aurora designer and click“Update”.Step 4:
Step 5: The stage will change to“Design Change Requested”.Step 5:
Pro Tips
💡 Practice on a test project before using this on live customer data.
💡 Take screenshots of your current settings before making changes.
💡 Ask for help: SubcontractorHub support is happy to walk you through any step.
Troubleshooting
Problem | Solution |
Page won't load | Clear your browser cache and try again in Chrome or Edge |
Settings not saving | Make sure you have Admin access and click Save after each change |
Feature not visible | Check with your account manager to confirm your plan includes this feature |
Change Log
Date | Change |
2026-05-19 | Article rewritten for clarity and contractor-friendly tone |
Split Analysis: This article covers a single focused topic and does not require splitting into sub-articles.