Why This Matters
Connecting your tools to SubcontractorHub means less manual data entry, fewer mistakes, and more time to focus on what you do best — running your business and closing jobs.
What You'll Need
Admin access to SubcontractorHub
An active account with the tool you're connecting
A web browser (Chrome or Edge recommended)
Step-by-Step Instructions
Step 1: By integrating IronRidge, you can create a Bill of Materials (BOM) for sola
Follow the steps below to set up the connection.
Step 2: From the main menu, go to“Manage Integrations”and click“Integrations”.Step
Step 3: Click“CRM”in the list on the left.Step 3:
Step 4: Locate the IronRidge card and click“Connect”.Step 4:
Step 5: Enter theBase URL,API Keyandemail, then click“Verify and connect”.Step 5:
Pro Tips
💡 Test first: After connecting, do a quick test to confirm data flows correctly.
💡 Check permissions: Make sure your team has the right access in both systems.
💡 Document your setup: Take notes on how you configured the integration for future reference.
Troubleshooting
Problem | Solution |
Page won't load | Clear your browser cache and try again in Chrome or Edge |
Settings not saving | Make sure you have Admin access and click Save after each change |
Feature not visible | Check with your account manager to confirm your plan includes this feature |
Connection failed | Double-check your credentials and make sure both accounts have admin access |
Data not syncing | Wait a few minutes, then check the integration status page for error messages |
Change Log
Date | Change |
2026-05-19 | Article rewritten for clarity and contractor-friendly tone |
Split Analysis: This article covers a single focused topic and does not require splitting into sub-articles.