Why This Matters
Learning this workflow helps you get more done in less time with SubcontractorHub. Follow these steps and you'll be set up in minutes.
What You'll Need
Admin access to SubcontractorHub
A web browser (Chrome or Edge recommended)
Step-by-Step Instructions
Step 1: Once your admin sets up the Aurora request design flow settings, follow the
Step 2: Click“New Proposal.”Step 2:
Step 3: Enter the required details, such as theAddress, selectJob Type (Solar), and
Step 4: Click“Create Proposal.”Step 4:
Step 5: In theConsumption Profile, under the"Utility"dropdown, select the utility.S
Step 6: Click“Start Design.”Step 6:
Step 7: Click“Design Request.”Step 7:
Additional Screenshots
These additional screenshots show the complete workflow:
Pro Tips
💡 Practice on a test project before using this on live customer data.
💡 Take screenshots of your current settings before making changes.
💡 Ask for help: SubcontractorHub support is happy to walk you through any step.
Troubleshooting
Problem | Solution |
Page won't load | Clear your browser cache and try again in Chrome or Edge |
Settings not saving | Make sure you have Admin access and click Save after each change |
Feature not visible | Check with your account manager to confirm your plan includes this feature |
Change Log
Date | Change |
2026-05-19 | Article rewritten for clarity and contractor-friendly tone |
Split Analysis: This article covers a single focused topic and does not require splitting into sub-articles.