Skip to main content
FAQs for device assignment

Support and advice for assigning your Tended device(s) to a project on your Dashboard

Cat Dulake avatar
Written by Cat Dulake
Updated over a week ago

This article covers some common questions that can come up when assigning devices to your Dashboard.

Before your devices are ready to go onsite, they need to be assigned to the correct project or site to get their information about the safe zones (geofences) for that shift.

If you're having an issue assigning your device to a project, there are a few things you can check. Let's dive in πŸ‘‡


I'm having issues with assigning my devices, what do I check?

Check which project it is assigned to

Devices can only be assigned to one project at a time. This is to ensure it has the correct information about the worksite(s) for a body of work.

To find out how to check if a device is assigned to a different project check out our guide here.

To find out how to unassign a device check out our guide here.

Check the device IDs

A common issue is the 6-digit ID of the device on-site does not match the one assigned to a project.

You can find out which device IDs are assigned to a specific project by following our guide here. You'll need the physical device in front of you to check the serial number, which can be found on the back of the device. It is a 6-digit number.

If you have confirmed that the correct device ID is not attached to the project, you will need to assign the device. Find out how to assign a device here.

Check what mode the device is assigned too

Another common issue is the device being assigned as the wrong type to a project. Devices can be used in Asset mode or Wearable mode. For using live location tracking, you'll need them to be in Asset mode.

You can view and change this from the "Devices" section on your Project page:


What's the difference between "Asset" and "Wearable" mode?

There are two modes a Wearable device can be used in:

  • Wearable mode

  • Asset mode

Wearable mode (for track workers)

Asset mode (for assets such as marker boards/trolleys)

βœ…

βœ…

βœ…

βœ…


What's the difference between "Assigned" and "Assigning" on the device table

When you've assigned devices to the project, you'll be able to view them all on the devices table.

The "Status" column indicates if a device is "Assigned" or "Assigning":

  • Assigned: this status tells you that the device is assigned and receiving the project or site geofence information.

  • Assigning: this status shows that the device is still working on receiving the project or site geofence information, this can take a couple of minutes in some cases


Any questions or issues?

We're here to help! Simply pop us an email at support@tended.co.uk, WhatsApp us on 07713682625 or drop us a message via live chat from the blue bubble in the corner of this page or within the Dashboard 😊

Did this answer your question?