Skip to main content

Domain status glossary: what your domain's status means

What each domain status in your dashboard means (Processing, NS statuses, Ready, Active, Failed, Awaiting Renewal, Expired, Inactive/Blocked, Manually Disabled), how long it takes, and when to contact support.

Your Domains page shows a status for each domain as it moves through setup. This is a quick reference across all the statuses you might see — for full detail on nameserver-related statuses specifically, see our "NS Not Set" guide. You can narrow the Domains page with the Status, Provider (Maildoso / Google / None) and Type (External / Maildoso) filters.

One rule for every stuck status: don't delete, re-add or re-register a domain to "fix" a status, and don't buy a replacement — the paid slot and the domain stay yours. Stuck statuses are resolved on our side: contact us with the domain name.

Setup statuses

  • Pending — the domain purchase or connection has started but provisioning hasn't finished yet. New domains need a short window after purchase before nameservers, DNS records and mailboxes can be created. If a domain stays Pending for more than 24 hours, contact us with the domain name.

  • Processing — the domain zone and DNS are being set up. This usually completes within 30 minutes to a few hours, up to 24 hours for a brand-new registration, and the status then changes to Active automatically — just wait and refresh the Domains page. A Maildoso-registered domain that is still Processing after 24 hours, or shows no nameservers, is stuck on our side (for example an order held at the registrar) — contact us with the domain name and we'll re-run it.

  • NS Not Set / Awaiting NS — the domain isn't yet pointed at Maildoso's nameservers. If you brought your own domain, add the two nameservers we generate at your registrar (the Nameservers column on the Domains page shows them; Export CSV → Awaiting NS Domains Only downloads the list for all such domains). If you registered the domain through Maildoso, there is nothing for you to set — this status means our provisioning hasn't completed; contact us with the domain name and we'll re-provision it.

  • NS Processing — we've detected a nameserver change and are finishing activation. This usually completes within about 2 hours, and up to 24 hours for full propagation.

  • NS Failed — for a domain registered through Maildoso, we couldn't set our nameservers for the domain at the registrar, so its setup stopped before it could become Active. There's nothing for you to change — contact us with the domain names and we'll re-run the setup. Don't delete or re-register the domain in the meantime. Large batches (dozens of domains) often show this together; send us the list in one message. For your own (external) domain, NS Failed usually means our daily check found that the domain no longer points to our two nameservers: set our two nameservers again at your registrar. If your registrar already shows exactly our two nameservers, contact us with the domain names.

  • NS Expired — the 24-hour window to set nameservers passed before they were added at your registrar. Select the domain(s) on the Domains page and click Bulk actions → Regenerate NS (or use the API), then add the new pair at your registrar — this is self-service and doesn't require re-purchasing the domain. If your registrar already shows the nameservers we gave you, ask us to confirm before regenerating.

  • Ready — the first step is done but DNS setup hasn't started yet: for a domain registered through Maildoso the purchase has completed, and for a domain you connected yourself it has just been added. This is not the same as Active. On a Maildoso-registered domain you can already create mailboxes — they finish setting up once the domain is Active; on your own (external) domain, mailboxes can only be created once it's Active. Ready normally moves on to Processing quickly — if a domain stays Ready for more than a day, contact us. Don't send real campaigns from a domain until it reaches Active.

  • Active — the domain is fully set up and ready for mailboxes and sending. For an external (bring-your-own) domain, Active also means we've confirmed it's pointed at our nameservers. We re-check external domains daily: if the nameservers are later changed or removed at your registrar, mail stops flowing and the domain drops out of Active (usually to NS Expired or NS Failed) — set our two nameservers again, or regenerate them, to recover.

  • Failed — the registration or connection attempt didn't complete, often due to a registrar-side error (for example, a duplicate order or a registrar rejecting the request). The paid slot stays on your plan. Contact us with the domain name and we'll investigate, retry, or help you register a different domain in the same slot at no extra charge — see Why did my domain registration fail or get stuck?

  • DNS_ERROR — the DNS records we expect for this domain don't match what's published (for example after a registrar-side change or a renewal). Unlike "NS Not Set", the domain is pointed at our nameservers but a record isn't resolving as expected. Avoid making DNS changes yourself and contact us with the domain name; in most cases we correct this from our side. See How DNS works on your Maildoso domains.

Renewal statuses

  • Awaiting Renewal — the domain's yearly term has ended and the renewal hasn't completed. Either your subscription is active and the renewal is queued on our side (we re-queue it — nothing to pay again), or your subscription had a gap on the renewal date and the domain wasn't renewed. Don't delete or re-add it; contact us with the domain name and we'll confirm which case applies and fix it. See Renewing your domains and mailboxes.

  • Expired — the domain wasn't renewed and has lapsed at the registry. Its mailboxes stop sending (they show Suspended · Domain expired on the Email accounts page, and sequencers show a 422 / "domain unavailable"). If it's still within the registry's grace period we can often renew it; otherwise a replacement domain in the same slot is the fix. Contact us before removing anything.

If a domain that was previously Active drops back into one of the statuses above shortly after its renewal date, don't remove or re-add nameservers at your registrar — they should already be correct, and touching them can restart the process. Give it up to 24 hours, then contact us with the domain name and approximate renewal date.

Inactive / Blocked: the registry put the domain on hold

An Inactive or Blocked status usually means the domain registry has placed the domain on serverHold. This suspends DNS for the domain, so mailboxes on it stop working. Registries do this for policy reasons — most often abuse complaints on TLDs such as .online, .xyz or .site — and it can't be lifted from the Maildoso dashboard.

  • Domain registered through Maildoso: contact support with the domain name. We manage the registrar relationship, so we'll check the reason for the hold and tell you whether it can be lifted or whether a replacement domain is the practical fix.

  • Your own (bring-your-own) domain: check the email you used at your registrar for a notice explaining the hold, and raise it with your registrar. Let us know as well so we can pause mailboxes on that domain cleanly.

  • If the hold can't be lifted, register a replacement domain on a safer TLD — see What are the best practices for configuring domains?

Manually Disabled

A domain marked MANUALLY DISABLED was intentionally deactivated. The most common reason today is a registry-level TLD suspension: domains on .online, .xyz and .site have been suspended at the Central Registry level. This is outside Maildoso's control and can't be reactivated from our side, even after you fix things at your registrar.

  • If your registrar (e.g. Spaceship) shows the domain as un-suspended, that's a separate layer from the registry suspension — the registry block can still be in place, so the domain stays disabled with us.

  • We no longer support external domains on these TLDs. Register a new domain on a different TLD and connect it to your account. Recommended: .com, .info, .co, .one (and .net / .org); .click and .top case by case — ask us first. Avoid .online, .site, .xyz, .space, .website, .sbs and .cfd.

  • Because an external domain's TLD status with the registry is outside our responsibility, we can't provide a free replacement for those. If we registered the affected domain for you, contact support — replacement works differently for domains we bought.

  • A domain can also be disabled at your request or for another policy or compliance reason. Contact us if you believe it was done in error — internal disables can be reversed.

Still not sure what you're seeing?

Statuses can vary slightly depending on how a domain was added (registered through Maildoso vs. brought from elsewhere). If your domain's status isn't covered here, send us the domain name and what the Domains page shows, and we'll confirm the status and the next step.

Mailboxes have their own set of statuses (Active, Inactive, Setup awaiting, Setup processing, Failed, Suspended · Domain expired, Suspended · Pre-warmed domain paused, Deletion scheduled). An Inactive mailbox is not deleted — it's temporarily disabled and can't send until it's reactivated. See What each mailbox status means.

Did this answer your question?