Skip to main content

(BETA) How do I optimize my routes?

🚧 As of November 2026, the Route Sequence Optimization tool described in this article is currently in beta with a limited group of users.

If you are looking for help with our original route optimization tool, please see: How can I optimize my route and its stop order?

Is one of your routes taking longer than expected to run? If yes, it might be because its order of stops isn't as efficient as it could be. But, perhaps you're not quite sure how to efficiently reorder those stops yourself. That's where Hauler Hero's Route Sequence Optimizer comes in to do it for you!


Who is this article for?

This article is for dispatchers and office staff who plan routes in Route Manager. It covers:

  • Optimizing a specific day's version of a route, or its master sequence for its future runs

  • What each optimization option does

  • How to review the proposed reordering and apply or reject them

  • Caveats about large routes, disposal stops, and yards


How does route optimization work?

Route optimization reorders the stops on a given route so that it runs as efficiently as possible.

You can choose to optimize for:

  • Time or Distance

  • What to avoid (tolls, highways, U-turns, service roads)

  • Whether or not stops should be approached from the same side of the road as the service address

  • Whether or not to route around your truck's size and weight

You'll review the proposed resequenced order next to your current one before making changes.

Route optimization will not:

  • Add or remove stops

  • Move stops to another route

  • Estimate when the route will finish

  • Consider service time windows (such as "not before 7:00 am")

  • Save anything unless you click Apply


Before You Start

  • You need permission to edit routes; either Edit or Full for your role's Route Manager permission. If you don't see the Optimize Route button, ask your administrator.

  • Your route should have a Starting Yard and Ending Yard. This is so the Route Optimizer knows where to start and end your route.

  • And finally, if you plan on steering around low bridges and weight limits, have your truck's height, width, length, and weight handy.


How do I optimize a route?

Start by clicking that route's Optimize button from the Route Manager. This location of the Optimize button will optimize that route for that day only.

If you want to optimize the route for all future runs of that route, you can do so via Master Sequence's Optimize button.

In the drawer that appears, configure your optimization:

  • Time -- Shortest estimated completion time

  • Distance -- Shortest distance driven

  • Route around truck size -- Helps us know what bridges and roads to avoid

    • If you use this, know that height, width, and length work together. Without all 3, you will not be able to run the optimizer with respect to your truck's size. Weight can be entered on its own.

    • This panel remembers your choices while you work. You won't need to re-enter your truck's size for every route.

  • Avoid -- Tolls, highways, U-turns, left/right turns, sharp turns, and/or service roads

  • Road side -- "Same Side" avoids cross-traffic stops for trucks

After you click Optimize This Day, the tool will start analyzing your route.

  • This button will read Optimize Master & Future Days if you are optimizing the route via Master Sequence.

  • For a route with more than 25 stops, it reads Optimize in Background. Large routes run in the background, so you can keep working or leave the page, and you'll get a notification when the results are ready.

  • If results from an earlier run are still showing, it reads Re-run Optimization.

Once it has finished analyzing, you'll see a notification. Click Review Optimization.

  • If you ever lose track of where this button is, you can access it at any time via the Notification Bell and locating the route optimization notification you're looking for. For a run that was already applied, the notification shows View Applied instead.

This will take you to a screen where you can compare your original route's order and the new proposed order.

You'll see the route's distance, before and after optimization, as well as what stops moved where. A stop the optimizer couldn't place is marked Not Optimized.

If you like what you see, click Apply to this Day. If not, click Reject.

  • This button will read Apply to Master & Future Days if you are optimizing the route via Master Sequence.

Presuming you clicked Apply to this Day, congratulations, you've successfully optimized your route's stop order!

Frequently Asked Questions

Why can't I apply the results?

One of three scenarios is likely the culprit:

  • The route changed after the run.

    • Perhaps stops were added or removed since you optimized. You'll need to optimize the route again.

  • The run didn't finish.

    • Something might have interrupted the optimization run. You'll need to optimize the route again.

  • Some stops aren't on the master sequence.

    • Sometimes, you'll see "# stops are not on the master sequence and will keep their current position."

    • You'll still be able to apply, however those particular stops will stay exactly where they are.

What happens to disposal stops and yards?

Disposal stops will be reordered like any other stop.

Your starting and ending yards are where your route begins and ends; so, they won't be reordered.


Feedback? Questions?

We'd love to hear your feedback to help us improve your experience. Please submit feedback through the chat bubble or email to support@haulerhero.com.

Did this answer your question?