Skip to main content

Hauler Hero Road: Driver Training Guide

This guide teaches drivers and office staff how to use Hauler Hero Road app, the rebuilt Android driver app.

1. Install and log in

Hauler Hero Road is a separate, free app. It installs alongside the original app, so both can run on the same tablet during rollout.

  1. Open the Google Play Store on the tablet.

  2. Search Hauler Hero Road and tap Install.

  3. Open the app with the black logo. The original app has the white logo.

  4. Log in with the same username and password used in the original app.

Turn on Play Store auto-update for the app. Engineering ships updates and fixes weekly.

Play Store listing for Hauler Hero Road
Tablet home screen with the original and Road app icons

2. Settings

The biggest change is that the sync settings are gone: Road syncs live, so there is no Quick Sync or Full Sync. Open settings from Account → Settings.

Setting

What it does

Changed from the original app?

Font size

Larger or smaller text

Same

Account name or address first

Which line leads on each stop card

Same

Autocomplete

Geofence radius, timing, speed and right-side autocomplete (ASL trucks)

Now has built-in guides explaining each setting

Sync

Removed

Live sync replaces manual Quick/Full Sync

Date

Work ahead (future dates) or behind (past dates)

Same

Night mode

Dark display for low light

Same

Settings with an autocomplete info guide open

Autocomplete countdown and recommended settings

Before autocomplete completes a stop, a countdown appears on it. Drivers can tap Snooze to delay it or Off to stop it, and the next stop is highlighted on the tablet.

  • Right side only: completes only stops on the curb side of the truck and skips the far side.

  • Dense routes: start with a tight radius and right side only.

  • Rural and roll-off routes: start with a wider radius and a longer buffer.

Autocomplete aims at the container pin, so accurate pins (section 6) make it more reliable.

Autocomplete countdown with Snooze and Off (from the Hero Summit session)

3. Pre- and post-trip inspections (DVIR)

Inspections now follow a full DOT-style checklist, with defect photos and a mechanic sign-off. Hauler Hero is not DOT-certified, but the checklist was built to DOT requirements.

  1. On the home screen, confirm the correct truck is selected.

  2. Tap New Inspection and choose Pre-trip or Post-trip.

  3. Tap Mark all good to fill a section, then change any item that has a problem to Defect.

  4. For each defect, describe it (for example, "one wiper blade needs replacing") and take a photo.

  5. Use the What qualifies as out of service guide to decide whether the truck can run.

  6. If the defect was fixed before leaving, mark it Repaired, enter the mechanic's name and get their authorization.

  7. Enter the starting odometer and engine hours. Add a dashboard photo if your company requires one.

  8. Tap Submit and sign.

After submitting, drivers can reopen any inspection for 90 days. Any driver who selects the same truck later can view inspections other drivers did on it. Post-trips work the same way.

**Pre/post-trip inspections can be disabled upon request. This setting applies to all drivers across your account and cannot be changed for individual drivers.

Pre-trip checklist with items marked good
Defect with comment, photo and out-of-service guide
Mechanic authorization for a repaired defect
Prior inspection reopened, showing odometer and engine hours

4. Select and load a route

The route list now shows only routes that have stops on the selected date, with a stop count for each. Routes load much faster: routes of 600 to 900 stops should load in under a minute.

  1. Tap the route selector on the home screen.

  2. Find your route. Each row shows its stop count and the driver it is assigned to, or Unassigned.

  3. Tap the route to load it.

The office assigns routes to drivers on the website's Route Manager page. The assigned driver's name then replaces Unassigned in the app.

Select Route list with stop counts

5. Work the stop list

The stop list keeps the original layout, so drivers can switch without retraining. Several small changes make stop status and notes easier to see.

  • Selected stop: outlined in blue.

  • Service days: a weekly calendar on each stop shows which days it is serviced. This helps drivers flag stops that need more frequent service.

  • Notes: shown directly on the stop card and in large text on the right. Drivers no longer have to tap in to find them.

Stop marker

Meaning

How long it shows

Purple, Hold

Vacation hold

Until the hold ends

Yellow icon, New

Service start date is recent

28 days from start, on every route the stop is on

Red triangle, Suspended

Account cut off or suspended

Until the account is reinstated; when the customer pays, the stop updates on the route right away

Servicing, skipping and exceptions work the same as in the original app, using the same exception menu. Two additions:

  • Fix a mistake: if a stop was serviced but should have been skipped (or the reverse), open it and change its status, even mid-route.

  • Bulk complete: completing several stops at once works as before.

Mixed stops: if some containers at a stop are serviced and one is skipped, the stop no longer counts as a skip.

Stop list with the selected stop outlined and its service-day calendar

New stop (yellow):

New stop banner

Vacation hold (purple):

Stop on vacation hold

Suspended stop (red):

Suspended stop banner

A stop card with its note displayed.

Stop with service notes shown on the card

6. Map and navigation

The map is now a working view: drivers can navigate turn by turn and confirm stops without leaving it.

  • Turn-by-turn navigation: voice directions to each stop, with the map following along (HERE Maps). Hauler Hero turns this on per company, and it can be turned off if drivers prefer not to hear it. Navigation leads to the container pin, not the service address.

  • Confirm from the map: service, skip or log exceptions directly on map pins. This works well for unsequenced residential routes worked street by street.

  • Your location: a GPS marker follows the truck as it moves.

  • Map views: 2D or 3D, standard or satellite. Night mode shows the map in dark tones.

  • Map on or off: switch between the full-screen map and the stop cards at any time.

  • Container pins: on stops with several containers (apartment complexes, malls), each container can have its own GPS pin. Once one driver places a pin, every driver can navigate to that exact container.

Map with the truck's GPS marker and stop pins.

Map view with stop pins and the selected stop's actions

Confirming a stop from the map

Confirming a stop while in map view

Zoomed-out map with the 2D/3D toggle.

Zoomed-out map with 2D and 3D buttons

Turn-by-turn navigation: the next street shows at the top of the map while the truck follows the route.

Turn-by-turn navigation on the Road map

Fix a container pin from the tablet

A correct pin fixes navigation and autocomplete for every driver on that stop. The new location also shows up in the CRM.

  1. On the stop, tap the exceptions button, then Container Location.

  2. Standing at the can, tap Use My Location instead, or drag the pin to the can on the map.

  3. Tap Save New Container Location.

Exceptions menu with Container Location
Dragging the container pin, then saving the new location

7. Disposal breaks and tickets

Drivers on residential and commercial routes can now log landfill trips as disposal breaks. This tracks tonnage without a dummy work order. The office can also add disposal stops ahead of time in the CRM's Route Manager. Disposal stops are turned on per company, so ask Hauler Hero to enable them.

  1. Select the stop the break should come after.

  2. Tap the event (calendar) icon and choose Disposal stop.

  3. Pick the landfill.

  4. Tap Add disposal ticket and enter the ticket details and material. The material's default rate fills in automatically if one is set. Add more tickets if needed.

  5. Tap Save, then Add to route. The break appears right below the selected stop.

  6. When the dump is done, tap the green check to complete the break.

Watch out: the disposal icon on the home screen still says "Coming soon" and does nothing. Always add disposal breaks through the event icon.

Event menu with Disposal stop.

Add event menu with Disposal stop

Disposal ticket entry, showing landfill, material and rate.

Disposal ticket with landfill, material and rate

The disposal break placed in the stop list, with its green check.

Disposal break placed in the stop list

8. Live sync, route changes and finishing the route

Route changes made in the office reach the driver right away, with no resync. If the tablet loses signal, Road saves the driver's work and syncs it when signal returns. When stops are added or removed, the stop count updates and the new stops appear on the route.

  • Push notification: drivers get a "Your route has changed" alert with a Reload route option.

  • Two drivers, one route: each driver sees the other's completed stops live.

  • Finishing: complete the route the same way as before. If your company turns on required post-trips, the app goes straight to the post-trip inspection when the route is complete.

The "Your route has changed" push notification.

Your route has changed notification with Refresh route

Completing the route and landing on the post-trip.

Post-trip opening after the route is completed

CONGRATS, YOUR ROUTE IS COMPLETE

Did this answer your question?