1. Install and log in
Hauler Hero Road is a separate, free app. It installs alongside the original app, so both can run on the same tablet during rollout.
Open the Google Play Store on the tablet.
Search Hauler Hero Road and tap Install.
Open the app with the black logo. The original app has the white logo.
Log in with the same username and password used in the original app.
Turn on Play Store auto-update for the app. Engineering ships updates and fixes weekly.
2. Settings
The biggest change is that the sync settings are gone: Road syncs live, so there is no Quick Sync or Full Sync. Open settings from Account → Settings.
Setting | What it does | Changed from the original app? |
Font size | Larger or smaller text | Same |
Account name or address first | Which line leads on each stop card | Same |
Autocomplete | Geofence radius, timing, speed and right-side autocomplete (ASL trucks) | Now has built-in guides explaining each setting |
Sync | Removed | Live sync replaces manual Quick/Full Sync |
Date | Work ahead (future dates) or behind (past dates) | Same |
Night mode | Dark display for low light | Same |
Autocomplete countdown and recommended settings
Before autocomplete completes a stop, a countdown appears on it. Drivers can tap Snooze to delay it or Off to stop it, and the next stop is highlighted on the tablet.
Right side only: completes only stops on the curb side of the truck and skips the far side.
Dense routes: start with a tight radius and right side only.
Rural and roll-off routes: start with a wider radius and a longer buffer.
Autocomplete aims at the container pin, so accurate pins (section 6) make it more reliable.
3. Pre- and post-trip inspections (DVIR)
Inspections now follow a full DOT-style checklist, with defect photos and a mechanic sign-off. Hauler Hero is not DOT-certified, but the checklist was built to DOT requirements.
On the home screen, confirm the correct truck is selected.
Tap New Inspection and choose Pre-trip or Post-trip.
Tap Mark all good to fill a section, then change any item that has a problem to Defect.
For each defect, describe it (for example, "one wiper blade needs replacing") and take a photo.
Use the What qualifies as out of service guide to decide whether the truck can run.
If the defect was fixed before leaving, mark it Repaired, enter the mechanic's name and get their authorization.
Enter the starting odometer and engine hours. Add a dashboard photo if your company requires one.
Tap Submit and sign.
After submitting, drivers can reopen any inspection for 90 days. Any driver who selects the same truck later can view inspections other drivers did on it. Post-trips work the same way.
**Pre/post-trip inspections can be disabled upon request. This setting applies to all drivers across your account and cannot be changed for individual drivers.
4. Select and load a route
The route list now shows only routes that have stops on the selected date, with a stop count for each. Routes load much faster: routes of 600 to 900 stops should load in under a minute.
Tap the route selector on the home screen.
Find your route. Each row shows its stop count and the driver it is assigned to, or Unassigned.
Tap the route to load it.
The office assigns routes to drivers on the website's Route Manager page. The assigned driver's name then replaces Unassigned in the app.
5. Work the stop list
The stop list keeps the original layout, so drivers can switch without retraining. Several small changes make stop status and notes easier to see.
Selected stop: outlined in blue.
Service days: a weekly calendar on each stop shows which days it is serviced. This helps drivers flag stops that need more frequent service.
Notes: shown directly on the stop card and in large text on the right. Drivers no longer have to tap in to find them.
Stop marker | Meaning | How long it shows |
Purple, Hold | Vacation hold | Until the hold ends |
Yellow icon, New | Service start date is recent | 28 days from start, on every route the stop is on |
Red triangle, Suspended | Account cut off or suspended | Until the account is reinstated; when the customer pays, the stop updates on the route right away |
Servicing, skipping and exceptions work the same as in the original app, using the same exception menu. Two additions:
Fix a mistake: if a stop was serviced but should have been skipped (or the reverse), open it and change its status, even mid-route.
Bulk complete: completing several stops at once works as before.
Mixed stops: if some containers at a stop are serviced and one is skipped, the stop no longer counts as a skip.
New stop (yellow):
Vacation hold (purple):
Suspended stop (red):
A stop card with its note displayed.
6. Map and navigation
The map is now a working view: drivers can navigate turn by turn and confirm stops without leaving it.
Turn-by-turn navigation: voice directions to each stop, with the map following along (HERE Maps). Hauler Hero turns this on per company, and it can be turned off if drivers prefer not to hear it. Navigation leads to the container pin, not the service address.
Confirm from the map: service, skip or log exceptions directly on map pins. This works well for unsequenced residential routes worked street by street.
Your location: a GPS marker follows the truck as it moves.
Map views: 2D or 3D, standard or satellite. Night mode shows the map in dark tones.
Map on or off: switch between the full-screen map and the stop cards at any time.
Container pins: on stops with several containers (apartment complexes, malls), each container can have its own GPS pin. Once one driver places a pin, every driver can navigate to that exact container.
Map with the truck's GPS marker and stop pins.
Confirming a stop from the map
Zoomed-out map with the 2D/3D toggle.
Turn-by-turn navigation: the next street shows at the top of the map while the truck follows the route.
Fix a container pin from the tablet
A correct pin fixes navigation and autocomplete for every driver on that stop. The new location also shows up in the CRM.
On the stop, tap the exceptions button, then Container Location.
Standing at the can, tap Use My Location instead, or drag the pin to the can on the map.
Tap Save New Container Location.
7. Disposal breaks and tickets
Drivers on residential and commercial routes can now log landfill trips as disposal breaks. This tracks tonnage without a dummy work order. The office can also add disposal stops ahead of time in the CRM's Route Manager. Disposal stops are turned on per company, so ask Hauler Hero to enable them.
Select the stop the break should come after.
Tap the event (calendar) icon and choose Disposal stop.
Pick the landfill.
Tap Add disposal ticket and enter the ticket details and material. The material's default rate fills in automatically if one is set. Add more tickets if needed.
Tap Save, then Add to route. The break appears right below the selected stop.
When the dump is done, tap the green check to complete the break.
Watch out: the disposal icon on the home screen still says "Coming soon" and does nothing. Always add disposal breaks through the event icon.
Event menu with Disposal stop.
Disposal ticket entry, showing landfill, material and rate.
The disposal break placed in the stop list, with its green check.
8. Live sync, route changes and finishing the route
Route changes made in the office reach the driver right away, with no resync. If the tablet loses signal, Road saves the driver's work and syncs it when signal returns. When stops are added or removed, the stop count updates and the new stops appear on the route.
Push notification: drivers get a "Your route has changed" alert with a Reload route option.
Two drivers, one route: each driver sees the other's completed stops live.
Finishing: complete the route the same way as before. If your company turns on required post-trips, the app goes straight to the post-trip inspection when the route is complete.
The "Your route has changed" push notification.
Completing the route and landing on the post-trip.
9. Office: review inspections and exceptions
The website's Review page gathers inspections and driver exceptions in one live view, replacing next-day exception reports. Ask Hauler Hero support to turn on inspection and exception review for your company if the tabs don't appear.
Inspections (for mechanics and fleet managers)
Go to Review → Inspections.
Open any inspection to see the full checklist, defect notes and photos.
Emailing written-up defects to a technician automatically is in development.
Exceptions (for CSRs)
Go to Review → Exceptions and pick a date range.
Filter by exception type, for example contamination or overloaded. Your filters stay in place the next time you open the page; Reset filters clears them.
For each exception, check the photo, then use the links to open the work order (to add a fee) or the customer account (to add a note or charge).
Decide the follow-up: increase service, add a fee, schedule an on-request pickup or contact the customer.
Use Export if you still need a spreadsheet.
Exception photos also appear on the CRM work order and in the notification center. If you bill in arrears, add extra-bag fees right on the work order.
The Review and Confirm buttons don't work yet. They are reserved for checking exceptions detected automatically from truck cameras.
Review → Inspections
Review → Exceptions, showing counts by day and type.
An exception with its photo and links to the work order and account.
Exception filters
Fix container pins in bulk
Use this to clean up many pins at once, for example after onboarding a route.
Go to Routes → Bulk → Change container location.
Pick a snap mode: nearest road, stop location or driver path.
Review the preview. Nothing moves until you confirm.
Drag, exclude or reset any container, then click Update.
Snapping to the driver path only works if Follow Me is on in the tablet settings and the driver has already run the route.
Promote Daily to Master
Autocomplete timestamps each stop, so today's route records the order the driver actually ran. Promote that day to the master route to keep the master in step with how the route is really run.
Option | What it does | Use it when |
Consolidate | Uses today's order but keeps every master stop, including every-other-week and monthly stops | The master has stops that aren't on today's route |
Replace master | Makes today's route the master, stop for stop | A route's order has gotten scrambled |
10. Known limitations and coming soon
Feature | Status | Workaround |
Run a route in reverse | Requested | Scroll to the end of the list, or start in the middle and work down |
Required pre-trip | Not available (required post-trip can be turned on) | Remind drivers to complete pre-trips |
Daily summary in the notification bar | Partly working: route-change alerts only | Use the push notification and reload the route |
Photo of the disposal receipt | Expected about 2 weeks after Nov 5 | Enter ticket details by hand |
Disposal icon on the home screen | Says "Coming soon" | Use the event icon (section 7) |
Empty exception; changes to Service review | Under discussion | Keep using Service review or a note to flag stops for the office |
Emailing defects to technicians | In development | Mechanics check Review → Inspections |
Review and Confirm buttons on exceptions | Reserved for camera-detected exceptions | Ignore for now |
Lunch, downtime and return-to-yard events | Planned | None |
iPhone and iPad | Not available; the app is Android only | Use Android tablets |
