Configuration requirements
EEVEE configuration package: EVSE-ID, configuration guide for the installer, registration guide for the charging station owner
Witty Share installation manual, XEV1R22T2(XX)
RFID hotspot badge
Configuration device: laptop or mobile phone
Follow the steps
Step 1: Activate the RFID hotspot badge. Once the charging station is installed, connect it and activate the badge. See the Witty Share installation manual.
Step 2: Use the badge to activate the Wi-Fi hotspot, then connect your phone or laptop and log in to the charging station. Alternatively, connect a laptop to the charging station with a UTP cable and use the host address https://hager-evcs-/.......... (complete it with the last 6 digits of the UID shown on the sticker on the charging station), or the IP address 192.168.0.100.
Step 3: Log in to the charging station with the default credentials:
Username:
adminPassword:
1234
Change the username and password after the first login.
Step 4: Connect the charging station to the EEVEE back-office URL. Enter the OCPP server address wss://eevee-hvpq.powerfill.app/ws/ and the unique Chargepoint ID.
Step 5: Restart the devices on the Witty Share.
If you are the installer, continue with step 6. If you are the owner of the charging station, continue with step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!