Configuration requirements
EEVEE configuration package, containing the EVSE ID, an installer configuration manual and an owner registration manual
A laptop as configuration device
Follow the steps
Step 1: Connect the controller to a router or switch with a network cable, using the ETH0 port on the charge controller.
Step 2: Switch on the circuit breaker or fuse and wait about 5 minutes for the controller to start.
Step 3: Open the web address of the controller. With DHCP, it may be reachable by hostname: http://ev3000.local/. If that does not work, use its IP address (for example http://192.168.0.172/).
Step 4: Find the IP address by running a ping to the hostname from a command prompt (Windows) or terminal (Mac):
Windows:
ping ev3000.local -4Mac:
ping ev3000.local
Step 5: Open the web interface, click the login icon and log in with:
Username:
manufacturerPassword:
manufacturer
Step 6: Go to Charging park > Charging stations, select the charge point and open Configuration.
Step 7: Set Release mode to By OCPP. With several charge points on one controller group, select the controller that has the RFID reader. Each OCPP ID must be unique (for example 1, 2, and so on). Click Save changes.
Step 8: Go to Charging park > OCPP > Configuration. Enter the Chargestation serial number and select the model (Veton_ONE, Veton_TWO, Veton_WALL or Veton_WallPlus). Set the backend URL to:
wss://eevee-hvpq.powerfill.app/ws/Veton{insert serial number}
Click Save.
Note on APN: If the charging station uses a SIM card, set the APN to: (TBD)
Step 9: Go to System control > Time. Make sure the date and time match your computer and click Save. You may need to log in again.
Step 10: Go to System control > Network. Make sure the "no gateway" field is not checked. Save if you changed it.
Step 11: Go to System control > Status and click Reboot system. Wait 5 minutes; the charger should then appear on the platform. Installers continue to Step 12. Owners continue to Step 13.
Step 12 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 13 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!