Configuration requirements
Configuration package (EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
Loxone Wallbox instructions
Loxone Config application
Configuration device: laptop
Follow the steps
Step 1: Go to the Network menu in the Loxone application and add an OCPP Server Connector.
Step 2: Give the connector a name and set the following:
Server Address:
wss://eevee-hvpq.powerfill.app/ws/Protocol:
V 1.6
Step 3: Save the settings to the Miniserver and wait until the circle turns green.
Step 4: Click Charging_Point_1 and set the Charging Point ID to the serial number of the charging station.
Step 5: Link the new API to the Wallbox and the NFC.
Step 6: Open the settings of the NFC Code Touch and set the authentication to 4 = OCPP.
Step 7: Save the settings to the Miniserver.
If you are the installer, continue to Step 8. If you are the owner of the charging station, continue to Step 9.
Step 8 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!