Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Hellonext configuration manual
EVbee Service App
Configuration device: mobile phone
Follow the steps
Step 1: Download the EVbee Service App from the App Store or Play Store and register an account.
Step 2: Open the app, select Create New Site, choose Commercial as the site type and enter the site details.
Step 3: Enter the Main Fuse Data and Circuit Data of the site.
Step 4: Add the charging station to the site using one of these methods:
Scan the QR code on the label of the charging station.
Use the Bluetooth scanner in the app to find the charging station.
Enter the serial number of the charging station.
Step 5: Set up the Basic Settings: configure Max. charge power and Time zone correctly.
Step 6: Go to Network and backend settings, set the mode to online and configure:
OCPP Backend:
wss://eevee-hvpq.powerfill.app/ws/Charger ID: the serial number of the charging station
Step 7: Select the desired Communication Mode. If the charging station uses a SIM card, configure the APN:
APN: (TBD)
Step 8: Press Done to complete the configuration.
If you are the installer, continue with Step 9. If you are the owner, continue with Step 10.
Step 9 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 10 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!