Configuration requirements

EEVEE configuration package, containing:
- SIM card (optional)
- EVSE-ID
- Configuration guide for the installer
- Registration guide for the owner of the charging station
OCPP EV Charger network configuration guide
A laptop or mobile phone to configure the charging station

Follow the steps

Step 1: Enable the WiFi AP configuration mode of the charging station:

Disconnect the charging station from the power supply and wait at least 30 seconds.
Press the emergency stop button.
Switch the charging station on. After 5 seconds you hear a beep.
After another 5 seconds you hear a beep and the LED blinks yellow.

Step 2: Open the WiFi settings on your phone or laptop and select the network EVSE-XXXXX XXXX. The default WiFi password is 12345678.

Step 3: Open a web browser and go to 192.168.1.1.

Step 4: Log in:

Step 5: Click Netwerk Configuratie (Network Configuration) and choose the correct network method.

The charging station supports WiFi, 4G and Ethernet.

Step 6: Configure the selected network method and save:

WiFi: select Wi-Fi Aangepast in Network Configuration and enter the WiFi SSID and password.
4G: select 4G in Network Configuration and enter the LTE settings of the SIM card:
- LTE APN: (TBD)
- LTE APN user: leave empty
- LTE APN password: leave empty
Ethernet: select Ethernet in Network Configuration and enter the Static IP, Gateway and Netmask, or select DHCP.

Step 7: Click Central System Configuration and enter:

Step 8: Save the settings and restart the charging station.

If you are the installer, go to Step 9. If you are the owner, go to Step 10.

Step 9 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 10 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!