Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Online installation guide
Configuration device: laptop
UTP (Ethernet) cable
Follow the steps
Step 1: Configure the charge point:
Scan the QR code on the charger to open Schneider's step-by-step installation guide.
Go to the documentation section and download the installation guide of the EVlink Smart Wallbox (EVB1A22P).
Page 35 describes the configuration steps of the charger.
Step 2: Connect the laptop to the charger with an Ethernet cable and set a static IP address on the laptop.
Step 3: Browse to http://192.168.0.102 and log in with the default credentials:
Username:
adminPassword:
ADMIN
Change these default credentials after the configuration.
Step 4: Open the supervision settings and enter:
Backend URL:
wss://eevee-hvpq.powerfill.app/ws/Charging station ID: the serial number of the charger
Step 5: Confirm the internet connection: reboot the charger and wait about 30 seconds for the page to refresh. If the charging station uses a SIM card, APN: (TBD)
Are you an installer? Continue with Step 6. Are you the owner of the charging station? Continue with Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!