Configuration requirements
Configuration package, containing a SIM card, an EVSE ID, a configuration guide for the installer and a registration guide for the owner of the charging station
Online Etrel manual
Laptop with Windows
UTP (Ethernet) cable
Follow the steps
Step 1: Connect the charging station to your laptop with a UTP cable. The port is on the lower left side of the charging station.
Step 2: Set a static IP address on your laptop. Go to Network & Internet settings > Ethernet > Adapter Options > Ethernet > Properties, open Internet Protocol Version 4 (TCP/IPv4) and enter:
IP address:
192.168.1.241Subnet mask:
255.255.255.0Default gateway:
192.168.1.1Leave the other fields empty and click OK.
Step 3: Enter 192.168.1.250 in the address bar of your browser.
Step 4: Log in with:
Username:
root@etrel.comPassword:
toor
Step 5: Click the three-line menu at the top left, then select configuration.
Step 6: Select connectivity, then GSM connectivity.
Step 7: Enter the GSM settings:
APN: if the charging station uses a SIM card, APN: (TBD)
Username and Password: leave empty
Ping server:
8.8.8.8Ping interval:
60Click save.
Step 8: Under Connectivity, select Central system connectivity and enter:
Charge point identity: the number on the supplied sticker, usually the EVSE ID (format (TBD))
Protocol type:
OCPP 1.6 JSONCentral system endpoint URL:
wss://eevee-hvpq.powerfill.app/ws/
Step 9: Go back to the menu, select diagnostics, then restart charger.
Installers continue to Step 10. Owners continue to Step 11.
Step 10 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 11 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!