Configuration requirements
EEVEE configuration package, containing:
SIM card
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Ethernet cable
Laptop with an Ethernet port
Online ABL manual
Follow the steps
Step 1: Open the charging station. On the left side of the charging station there is a 4G dongle, which is connected to a USB port by default. Disconnect the dongle, remove its cap and insert the SIM card.
Step 2: Connect the laptop to the charging station with the Ethernet cable.
Use the Ethernet port next to the 4G dongle.
Step 3: Open a browser on the laptop and go to http://169.254.1.1:8300/. This opens the interface of the charging station.
Step 4: Click Verbindingen (Connections), then Mobile.
Step 5: Leave the username and password empty and set the APN: (TBD)
Click save.
Step 6: Go to the OCPP settings and change the OCPP-versie (OCPP version) to 1.6.
Step 7: Enter the following in the Centraal systeemadres (URL) (Central system address) field: wss://eevee-hvpq.powerfill.app/ws/
Step 8: Leave the local port and local path fields empty. The basiswachtwoord voor authenticatie (basic authentication password) can also be left empty.
Step 9: Click save.
Step 10: Go to the onderhoud (maintenance) settings and select harde reset (hard reset).
If you are the installer, go to Step 11. If you are the owner, go to Step 12.
Step 11 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 12 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!