Configuration requirements
Configuration package, containing the EVSE-ID, a configuration guide for the installer and a registration guide for the owner
Enphase app set up for the IQ EV Charger, using one of the following guides:
Standalone: charging station only, without an Enphase solar or battery system
Integrated: charging station at a location with an Enphase solar or battery system
Follow the steps
Step 1: Install and commission the charging station
Install and set up the IQ EV Charger with the Enphase Installer Toolkit app.
Add it to an existing system or create a new system for the charging station.
Owners who commission the charging station via the Enphase app after installation follow the commissioning steps in this guide.
Step 2: Optimise the charging station in the Enphase app
Owners follow the standalone or integrated app setup guide (available on enphase.com).
Step 3: Start the partner integration (owners)
Go to Menu – Settings – IQ EV Charger – Partner Integration.
On the partner integration page, select (TBD) as the partner.
Review the details and grant the selected partner access to your system.
Once enabled, the connection request for the charging station is sent to the EEVEE platform.
Installers continue to Step 4. Owners continue to Step 5.
Step 4 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 5 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!