Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Sungrow installation guide: IDC30E quick installation guide (PDF)
Follow the steps
Step 1: Connect the charger to the internet via one of the following methods:
Ethernet cable in the LAN socket (RJ45)
SIM card (insert it before powering on the charger)
Stable Wi-Fi connection
Step 2: When powered on for the first time, the charger runs a system check and then shows the start page. The upper left corner shows the time, date and ID; the upper right corner shows the network status and language.
Step 3: Enter operation and maintenance mode: press the time in the upper left corner for 4 seconds, enter the authentication code 262924 and press Enter.
Step 4: Configure the network:
SIM card: insert the SIM card while the charger is switched off. Click Read to read the ICCID, enter the APN, click Set and close the dialog.
APN: (TBD)
Wi-Fi: click AddSSID, enter the SSID and password and click OK.
SIM PIN code: (TBD)
Step 5: Connect the charger to EEVEE:
In the Available web socket drop-down menu, select
Other.Charger ID: the unique serial number of the charger
WebSocket URL:
wss://eevee-hvpq.powerfill.app/ws/Click Set and restart the charger (switch off the power until the display goes black, then switch it back on).
Are you an installer? Continue with Step 6. Are you the owner of the charging station? Continue with Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!