Configuration requirements
EEVEE configuration package, containing:
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Scame BE-T installation manual
Configuration device: laptop, smartphone or tablet
Ethernet cable or Wi-Fi connection
Follow the steps
Step 1: Install the charger according to the Scame BE-T installation manual.
Step 2: Connect the master station to your device via Ethernet, or connect it to a local network via Wi-Fi.
Step 3: Connect the RS485 serial line from the satellite stations to the master station (up to 16 charging points are supported).
Step 4: Open a web browser and go to the default IP address 192.168.30.126.
Step 5: Log in to the server with the default credentials:
Username:
adminPassword:
gsroot
Change these default credentials after the configuration.
Step 6: Open the Settings menu.
Step 7: Open the Network Setup menu and enter the parameters to connect the station to your network. The control system uses the IP address set here.
Step 8: In the OCPP Type Selector menu, select OCPP 1.6 JSON.
Step 9: Open the OCPP 1.6 Setup menu and enter the following values:
OCPP Enabled:
EnableWebSocket SSL:
EnableCentral Station IP Address:
eevee-hvpq.powerfill.appCentral Station TCP Port:
443Central Station Path:
/ws/Charge Box Identity: the unique serial number of the charging station
SIM Card Serial Number (ICCID): leave empty
SIM Card PIN (IMSI): leave empty
Step 10: Save the settings and reboot the station.
Are you an installer? Continue with Step 11. Are you the owner of the charging station? Continue with Step 12.
Step 11 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 12 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!