Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Kempower installation manual
Configuration device: laptop
UTP cable
Follow the steps
Step 1: Adjust the network settings of your computer to the local IP address of the charging station. Click the internet icon in the bottom-right corner and open "Network and Internet settings".
Step 2: Under "Advanced network settings", select "Change adapter options".
Step 3: In "Change adapter options", find the Ethernet adapter, right-click it and choose "Properties".
Step 4: In "Ethernet Properties", select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
Step 5: Select "Use the following IP address" if it is not selected yet and enter:
IP address:
192.168.100.10Subnet Mask:
255.255.255.0
Step 6: Click OK and close the window.
Step 7: Prepare the charging station:
Disconnect the charging station from mains power and wait 2 minutes before opening the covers.
Open the front cover of the T-series and connect an Ethernet cable to the RJ45 connector.
Power on the T-series charging station.
Connect the other end of the Ethernet cable to the PC.
Step 8: When the charging station is on, open a web browser and go to https://192.168.100.200:8443. Some browsers show certificate warnings (for example Firefox): click Advanced... and then Accept the Risk and Continue.
Step 9: Enter the security key. The key is supplied as a separate text file. Copy and paste the entire file, including the begin and end headers, into the dialog and click Aanmelden (Log in).
Do not share this key publicly!
Step 10: Click Netwerk (Network) in the left menu. Turn off WiFi if it is enabled. Enable Legacy USB Modem. Leave SIM card ICCID empty.
Step 11: Go to Settings in the right menu and click Connectivity & Integrations. Turn on the OCPP 1.6. backend toggle and enter:
Endpoint URL:
wss://eevee-hvpq.powerfill.app/ws/Charge point identity: the serial number of the charging station
Click Save and Sync.
If the charging station uses a SIM card, APN: (TBD)
If you are the installer, continue with Step 12. If you are the owner, continue with Step 13.
Step 12 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 13 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!