Configuration requirements
Configuration package, containing:
SIM card (optional)
EVSE ID
Online ABL manual
Envelope with the QR code for the end customer
Windows laptop with a UTP (Ethernet) port
UTP cable
Follow the steps
Step 1: Follow the KEBA manual to access the interface.
Step 2: Make sure DIP switch 2.5 is set.
Step 3: Connect your laptop to the KEBA charging station with a UTP cable.
Step 4: Set a fixed IP address on the Ethernet adapter of your laptop (IPv4 properties), leaving the other fields empty:
IP address:
192.168.42.1Subnet mask:
255.255.255.0Default gateway:
192.168.42.1
Step 5: Open your browser and enter the IP address shown on the display of the charging station.
Step 6: Enter the login details stated in the supplied KEBA manual, then change the password manually.
Step 7: Under "Configuration settings", enter the following and click apply:
APN: if the charging station uses a SIM card, APN: (TBD)
APN Username:
blankAPN Password:
blankCharge point identity: charge point number or EVSE ID (from the supplied sticker)
OCPP Communication Type:
OCPP 1.6 JSONCentral System Hostname:
eevee-hvpq.powerfill.appCentral System Port:
443Central System Path:
/ws/Secure Central System Connection (TLS):
ONCentral System Authentication Method:
NoneReconnect interval:
30Websocket Ping Interval:
60Predefined Token:
predefined(*tokenid)Meter values during charging session:
3000Meter values referenced to clock:
300
For APN Username and APN Password, write "blank" instead of leaving the field empty.
Step 8: Reboot the charging station.
Step 9: Wait 10 minutes, then check whether the charging station has connected to the EEVEE platform. Contact EEVEE support: (TBD). Have the EVSE ID at hand.
Step 10 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!