Configuration requirements

Configuration package, containing the EVSE-ID, a configuration guide for the installer and a registration guide for the owner
EN+ user manual
Mobile phone as configuration device
Wi-Fi connection

Follow the steps

Step 1: Network configuration

Turn on Wi-Fi and airplane mode on your phone.
Select the hotspot of the charging station. Its name starts with "SN" followed by the serial number of the charging station.
Enter the default Wi-Fi password: admin123

Step 2: Log in

Open a browser.
Go to the IP address of the device, default 192.168.4.1.
Enter the 4-digit network PIN, which is printed on the last page of the charging station manual.

Make sure you are connected to the correct hotspot, otherwise the login interface will not open.

Step 3: Wi-Fi setup

Click Network Setup, then WiFi.
Select your Wi-Fi network. If it is not listed, choose Overige (Other) and enter the network details manually.
Change the server address to: wss://eevee-hvpq.powerfill.app/ws/
After you enter the server address, the SN appears automatically.

After setting up Wi-Fi, reselect the hotspot of the charging station and re-enter the password.

Step 4: Verify the network connection

After logging in again, check that Wi-Fi strength is Excellent, server status is Connected and network status is Online.
If the signal is weak, try a different Wi-Fi network.
If the server communication has dropped or the status shows Offline, reset the network settings and repeat Steps 2 and 3.
Installers continue to Step 5. Owners continue to Step 6.

Step 5 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 6 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!