Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Configuration device: laptop
UTP network cable
Follow the steps
Step 1: Switch off the power to the charger and open the front cover.
Step 2: On the motherboard, set the N1N2 (5/6) dip switch to ON.
Step 3: Connect one end of the network cable to the WLAN port on the motherboard and the other end to your laptop. Switch the power to the charger back on.
Step 4: Set a static IP address on your laptop (macOS or Windows 10).
Step 5: Open the web page of the charger at http://192.168.1.253/index.html and log in with the default credentials:
Username:
rootPassword:
root@123456
Step 6: In the Configuration menu, change CsmsWebsocketUrl to:
wss://eevee-hvpq.powerfill.app/ws/
If the charging station uses a SIM card, set SimCardAPN: (TBD)
Step 7: In the Network menu, select SWITCH_CODE as the server network method.
Step 8: Set the N1N2 (5/6) selector on the motherboard according to the connection method used:
WiFi
4G
LAN
Step 9: Reboot the charger to complete the configuration.
Are you an installer? Continue with Step 10. Are you the owner of the charging station? Continue with Step 11.
Step 10 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 11 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!