Configuration requirements
EEVEE configuration package, containing:
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
ChargePost installation guide
Configuration device: Windows laptop with a pre-installed browser
LAN cable
Follow the steps
Step 1: Complete the installation of the charging station safely using the ChargePost installation guide.
Step 2: Set the network settings of the laptop:
IP address:
172.17.10.99Subnet mask:
255.255.255.0
Step 3: Connect the laptop to the service port of the PLC of the charging station with the LAN cable.
Step 4: Open a browser and enter 172.17.10.100:8080.
If the web interface does not appear automatically, contact ADS-TEC support.
Step 5: Log in to the Service HMI with the login credentials from the product training.
Step 6: Go to the Network menu, select Routers and configure the APN settings for the U12 router.
Step 7: Select Set Credentials and enter the APN name:
If the charging station uses a SIM card, APN: (TBD)
PIN, username and password for the SIM card: (TBD)
Step 8: Go to the OCPP menu and enter the following:
OCPP:
WSS(secure/TLS connection ON)Host name:
eevee-hvpq.powerfill.appPath:
/ws/Select port:
443CPID / backend ID: the serial number of the charging station
Security Profile:
0
The other OCPP settings can be left empty.
Step 9: Save the settings and restart the charging station.
If you are the installer, go to Step 10. If you are the owner, go to Step 11.
Step 10 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 11 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!