Configuration requirements
EEVEE configuration package, containing an optional SIM card, the EVSE ID, an installer configuration manual and an owner registration manual
A laptop
A UTP cable
Follow the steps
Step 1: Choose one of the connection options:
Step 1/1: Connect the PC directly to the charger with an Ethernet cable. The LAN interface of the charger must be set to a static IP address.
Step 1/2: Connect both the charger and the PC to a router with a DHCP server. Check the router for the assigned IP addresses. Both devices should receive addresses in the same range.
In both cases a direct PC connection is required for the OCPP configuration.
Step 2: Open a browser and go to 192.168.0.10.
Step 3: Log in with the default username admin and default password admin. On first login, or if the password has not been changed, a warning appears recommending a password change. Change it with the "change password" button on the login page or in the administration password section under the system maintenance tab.
If pages load or display incorrectly, clear or force-refresh the browser cache and cookies.
Step 4: Set the OCPP mode to enabled. The connection settings and configuration parameters sections then become editable. OCPP 1.6 is the only available version and is selected by default. The central system address and charge point ID are mandatory before the page can be saved. Fill in:
OCPP Connection:
EnabledOCPP Version:
1.6 / 1.6 JsonCentral system address:
wss://eevee-hvpq.powerfill.app/ws/Charge point ID: the serial number of the charger
Enter the values carefully; the system rejects invalid entries with a warning. Then click save.
Note on APN: If the charging station uses a SIM card, APN: (TBD)
Installers continue to Step 5. Owners continue to Step 6.
Step 5 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 6 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!