Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
A laptop to configure the device
A UTP cable
Follow the steps
Step 1: Log in to the Evonity platform via http://ev3000:81.
Username:
operatorPassword:
operator
Step 2: Go to the charging station overview and open "EVSE configuration".
Step 3: Find the EVSE, click the "+" icon next to it and then click the configuration icon.
Step 4: Set "enable mode" to by OCPP.
Step 5: Choose the socket locking mode:
at EV connected - disconnected: the socket locks automatically when a vehicle is connected.by remote control: the socket is locked remotely via OCPP.
Save with "save changes".
Step 6: Open the OCPP configuration overview. Enter the backend URL followed by "/OCPP ID", replacing "OCPP ID" with your specific OCPP ID:
wss://eevee-hvpq.powerfill.app/ws/"OCPP"
Save with "save changes".
APN settings: if the charging station uses a SIM card, APN: (TBD)
Step 7: Click "restart OCPP" to apply the new configuration.
Are you the installer? Continue with Step 8. Are you the owner of the charging station? Continue with Step 9.
Step 8 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!