Configuration requirements
Configuration package (SIM card, EVSE-ID, configuration guide for the installer, registration guide for the owner)
E-Lift installation manual
RNDIS driver
Configuration device: a computer
USB-A to USB-C cable
Follow the steps
Step 1: Insert the SIM card.
Step 2: Connect the USB-C cable to the USB port on the charge controller.
Step 3: Download the RNDIS driver from the Microsoft Update Catalog.
Step 4: With the cable connected, find the USB/RNDIS device on the computer.
Step 5: Open the RNDIS properties and set the IP address.
Step 6: In a browser, go to 192.168.5.1 to connect to the controller.
Step 7: Log in at the top right of the controller interface.
Step 8: Choose a user account to log in with.
Step 9: Open the OCPP settings to configure the connection.
Step 10: Enter the backend URL and the ID. Set the network interface for GSM to cellular.
Backend URL:
wss://eevee-hvpq.powerfill.app/ws/*SerialNumberChargePoint*Replace the placeholder after the "/" with the serial number of the charging station.
If the charging station uses a SIM card, APN: (TBD)
Step 11: Set the modem settings according to the manufacturer's reference settings.
Step 12: Install the latest firmware version.
Step 13: Use the Phoenix Contact installation software to perform the update.
Step 14: Restart the charge controller after all settings and steps are complete.
When the controller is online after the restart, the LINK LED stays solid. The APP LED blinks red while connecting to the EEVEE platform until the controller is fully online.
Installers continue to Step 15. Owners continue to Step 16.
Step 15 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 16 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!