Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Configuration device: mobile phone
Follow the steps
Step 1: Plug the GONEO smart cable into a wall socket.
Step 2: Press and hold the button for 3 seconds to activate Access Point mode.
Step 3: Scan the first QR code on the screen of the cable and connect the Wi-Fi of your phone or tablet to the local Access Point. The first QR code disappears and a second one appears.
Step 4: Scan the second QR code. The web application opens in your browser.
Step 5: In the web application, open the menu (three horizontal lines) and go to "Service".
Step 6: On the "Service" page, set the OCPP parameters:
Make sure OCPP is enabled; turn it on if it is not.
CPMS server URL:
wss://eevee-hvpq.powerfill.app/ws/Device ID: the serial number or EVSE-ID
Tag ID: the UID of the charging card (TBD)
Password: not needed
Then go to "Network" in the menu and configure the SIM settings:
Type:
SIMAPN: if the charging station uses a SIM card, APN: (TBD)
Leave the other fields empty.
Are you the installer? Continue with Step 7. Are you the owner of the charging station? Continue with Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!