Configuration requirements
Configuration package for EEVEE, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Green Motion DC installation manual
Configuration device: laptop
Ethernet cable
The charging station is configured via a web portal on the Teltonika RUTX09 router, accessed with a laptop over Ethernet. Supported browsers: Chrome, Opera and Firefox. Safari is not supported.
Follow the steps
Step 1: Switch off the charging station with the main switch. Connect a laptop with an RJ-45 cable to a LAN port on the Teltonika router.
Step 2: Switch on the charging station with the main switch and wait until the LED indicator turns green.
Step 3: In a browser, go to http://192.168.52.11. Ignore the certificate warning by clicking Doorgaan naar 192.168.52.11 (onveilig) (Proceed to 192.168.52.11 (unsafe)).
Step 4: The configuration page appears.
Over Ethernet, the configuration session stays active for 30 minutes. After that, restart the charging station to continue.
Step 5: In the OCPP configuration section, enter:
Server URL:
wss://eevee-hvpq.powerfill.app/ws/{BoxId}Security Profile:
2 - TLS user/password authenticationUser: leave empty
Password: leave empty
Step 6: In the Reboot and Apply section at the bottom, click Save and then Restart App.
Are you the installer? Continue with Step 7. Are you the owner of the charging station? Continue with Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!