Configuration requirements
Configuration package (SIM card (optional), EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
Cable (supplied with the charging station)
Configuration device: laptop
Follow the steps
Step 1: After a safe installation according to the installation manual, connect a PC or laptop to the charging station. Make the following changes in the Mennekes web interface.
Step 2: GPRS configuration (SIM details): if the charging station uses a SIM card, enter the access point name (APN): (TBD)
Step 3: Under the Backend menu item, select Open Charge Point Protocol v1.6J (OCPP 1.6J).
Step 4: Set the ACU name. This is your ChargeBox ID.
Step 5: Backend settings: make sure the first three checkboxes in the OCPP settings are ticked, and enter the OCPP backend URL:
wss://eevee-hvpq.powerfill.app/ws/
Step 6: Click Opslaan (Save), then reset the charging station.
If you are the installer, continue to Step 7. If you are the owner of the charging station, continue to Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!