Configuration requirements
Configuration package (SIM card (optional), EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
Installation manual PULSE
Configuration device: laptop
Follow the steps
Step 1: Remove the SD card from the OCPP kit, which is located on the CPU of the charging station.
Step 2: Open the file config.exp and change the following keys:
ChargeboxId: the serial number of the charging station
OCPP_SERVER_URL:
wss://eevee-hvpq.powerfill.app/ws/VersionOCPP:
OCPP1.6PDL_Power: the maximum power of the charging station in kWh
You can edit the file in a text editor, but the file must keep its ANSI encoding.
Step 3: Save the file and change its extension so it becomes config.csv.
Step 4: Put the SD card back into the OCPP kit and switch on the charging station. The configuration is uploaded automatically when the charging station powers on.
If you are the installer, continue to Step 5. If you are the owner of the charging station, continue to Step 6.
Step 5 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 6 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!