Configuration requirements
Configuration package, containing a SIM card (optional), an EVSE-ID, a configuration guide for the installer and a registration guide for the owner
Flexpole installation manual (via elli.eco/en/downloads)
Laptop as configuration device
LAN cable
Follow the steps
Step 1: Network settings on the laptop
Set a static IP address for the LAN port: IP address
192.168.1.101, Gateway255.255.255.0
Step 2: Connect to the charging station
Open the rear door of the charging station and connect the laptop to the LAN port.
Step 3: Log in to the web interface
Open http://192.168.1.1/ in a web browser.
The login details depend on the firmware version:
Up to FW 1.1.3.1: username
dupowerFrom FW 2.0.x.x: username
default_adminPassword: available on request
Step 4: Enter the OCPP settings
OCPP-CS-ID: the serial number of the charging station
Operator Backend:
wss://eevee-hvpq.powerfill.app/ws/Security Profile:
0SIM Card Kind:
publicAPN: if the charging station uses a SIM card, APN: (TBD)
The username and password for basic authentication are only required with Security Profile 2 or 3.
Step 5: Save and restart
Save the settings and restart the charging station.
Installers continue to Step 6. Owners continue to Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!