Step 1: Download IPSetup.exe and install it on a Windows computer. Look up the MAC address of the device on the communication card inside the charging station.

Step 2: Change the IP address of the charging station. The computer and the charging station must be in the same network and the same range. In IP Setup, enter the MAC address of the device and the desired IP address, then click Configureren (Configure).

Step 3: Log in to the WebUI. The setup page opens automatically in your default browser, or you can enter the configured IP address manually. Log in if required:

Step 4: Under Netwerk (Network), switch on DHCP so the charging station automatically receives an IP address when it is connected to the router or switch. Then click the Opslaan (Save) icon at the top right.

Step 5: Go to Integraties (Integrations) and select OCPP 1.6.

Step 6: Click the Link button that appears after selecting OCPP 1.6 to open the OCPP configuration. Log in again with:

Step 7: Under Centraal systeem (Central system), set the host URL to wss://eevee-hvpq.powerfill.app/ws/ and click Opslaan (Save).

Step 8: Save the changes with Opslaan (Save) and restart the charging station with the restart button at the top right.

Step 9 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 10 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!