Configuration requirements

EEVEE configuration package, containing:
- SIM card (optional)
- EVSE ID
- Configuration manual for the installer
- Registration manual for the owner of the charging station
Schrack Technik installation manual
Configuration device: laptop
Micro-USB cable

Follow the steps

Step 1: Connect the laptop to the local network of the charger, or connect both devices with a micro-USB cable.

Step 2: Open the configuration page by going to 192.168.123.123.

Step 3: Navigate to the backend settings of the charger.

Step 4: Enter the following values:

Connection Type: GSM (if the charging station uses a SIM card, APN: (TBD)), WLAN, ETHERNET or USB
OCPP ChargeBoxIdentity (ChargePointID): the unique serial number of the charger
OCPP Mode: OCPP-J 1.6
WebSockets JSON OCPP URL of the backend: wss://eevee-hvpq.powerfill.app/ws/
Web sockets proxy: -
WebSockets keep-alive interval: 60
OCPP connection strictness: -
HTTP Basic Authentication password: -

Step 5: Check the backend connection in the Diagnostics menu.

Are you an installer? Continue with Step 6. Are you the owner of the charging station? Continue with Step 7.

Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 7 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!