Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Follow the steps
Step 1: Create an Autel account:
Download the Autel app from the App Store or Google Play Store.
Turn on Bluetooth and, if possible, WiFi/mobile data.
Open the app and create an account with an email address or phone number.
Step 2: Verify your account via the email from Autel and log in.
The verification email may end up in your spam folder.
Step 3: Add the charging station to the app:
Option A (QR code): scan the QR code on the Quick reference guide supplied with the charging station. The serial number and PIN are filled in automatically.
Option B (manual): choose to add manually and enter the serial number and PIN printed above or below the QR code.
Step 4: Configure the connection of the charging station:
Connect via Bluetooth first.
Select and connect to WiFi.
Once connected, tap Account.
Tap Lader (Charger).
Go to the OCPP server.
Select the correct server: (TBD)
Enter the APN: if the charging station uses a SIM card, APN: (TBD)
Set the OCPP ID to AUT####, where #### is the serial number of the charging station.
If you are the installer, go to Step 5. If you are the owner, go to Step 6.
Step 5 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 6 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!