Configuration requirements
Configuration package (SIM card (optional), EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
DirectPowerPS AC Tower installation manual
Configuration device: laptop
SIM card or Ethernet cable
Follow the steps
Step 1: Open the web configuration interface using one of these methods:
USB: connect a USB-A to micro-USB cable to the port marked CONFIG and open the operator page at
http://192.168.123.123/operator.Ethernet: connect via Ethernet, set your PC to the static IP address
192.168.124.100with subnet mask255.255.255.0, and open the operator page athttp://192.168.124.123/operator.
Step 2: Log in with the default operator credentials: username operator, password yellow_zone.
Change the default password immediately after logging in.
Step 3: Open the Network submenu and choose one of the following:
Automatic (DHCP): the DHCP server of the network assigns the IP address.
Static: you assign the IP address manually.
Step 4: Open the Backend submenu and enter the following:
OCPP ChargeBoxIdentity: the unique serial number of the charging station
OCPP mode:
OCPP-J 1.6WebSocket JSON OCPP URL:
wss://eevee-hvpq.powerfill.app/ws/
If the charging station uses a SIM card, APN: (TBD)
Step 5: Check the Dashboard submenu to confirm that the charging station is connected to the EEVEE platform.
If you are the installer, continue to Step 6. If you are the owner of the charging station, continue to Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!