Step 1: Open Run in Windows, enter ncpa.cpl and open the network settings.

Step 2: Open the IPv4 settings of the LAN connection and set:

Step 3: Connect a LAN cable from the laptop to the LAN3 port on the Ethernet switch of the charging station.

Step 4: Open a browser and go to the IP address of the charging station, based on the last four digits of the serial number, on port 8080:

Step 5: On the home page of the WebUI, click Config.

Step 6: On the login screen, enter:

Step 7: Open the OCPP settings of the charging station.

Step 8: Select ConnectionParameters.

Step 9: Set CsAddress to wss://eevee-hvpq.powerfill.app/ws/

Step 10: If the charging station uses a SIM card, configure the APN accordingly in the Interfaces menu.

Step 11: Select the MobileBroadband tab.

Step 12: Enable the mobile network and enter the APN:

Step 13 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 14 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!