Configuration requirements
EEVEE configuration package, containing an optional SIM card, the EVSE ID, an installer configuration manual and an owner registration manual
Technagon installation guide
Laptop running Windows 11, macOS or Linux
Micro-USB cable
Follow the steps
Step 1: Log in to the web interface.
URL:
https://192.168.32.1Username:
adminPassword: the serial number of the charger
Step 2: Configure the network settings.
Under network (WAN/Internet), select
auto (DHCP)to assign the IP address automatically, or set a static IP address as needed.Set
never defaultif the connection should prioritise cellular communication.
Step 3: Configure OCPP.
Go to communication and open the OCPP section.
Set operator to
customand enter the URL:wss://eevee-hvpq.powerfill.app/ws/
Step 4: Set the authorisation.
Enter an authorisation key if the backend requires one.
The protocol version is
OCPP-J 1.6 json. This field cannot be edited.
Step 5: Check the Chargebox ID.
Confirm that the Chargebox ID is generated automatically from the serial number.
Optionally, change the Chargebox ID (Template) so that the charger identifies itself to the back office as you want.
Save the settings.
Step 6: Restart.
Go to the admin menu and restart the charger to apply the configuration.
Optionally, reboot the system so that all settings take full effect.
Note on APN: If the charging station uses a SIM card, set the APN name to: (TBD)
Installers continue to Step 7. Owners continue to Step 8.
Step 7 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 8 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!