Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Atlas AC Commercial configuration app
Configuration device: mobile phone
Follow the steps
Step 1: Install the app.
Android: download the Atlas Commercial network configuration app by scanning the QR code or clicking the download link.
iPhone: first send the UDID of your device to EV Charging+ (EVCCE). They will send you an installation link.
Step 2: Log in with the maintenance account:
Account:
maintenancePassword:
123654
Step 3: Select your charging station. Turn on Bluetooth, tap "Start Scanning", select the charging station and tap "Connect". Enter the authorization code: 123456.
Step 4: Network configuration. Choose one of the following options:
Ethernet: check the IP address and set it manually if it does not match.
SIM card: only if the charging station has a 4G module.
Wi-Fi: enter the network name and password in the WLAN settings.
Step 5: Enter the OCPP settings. Go to Settings > Network > Server, choose "Custom" and enter:
Server address:
wss://eevee-hvpq.powerfill.app/ws/Server port:
443
Restart the charging station after changing these settings.
If the charging station uses a SIM card, the APN must be changed to: (TBD)
Are you the installer? Continue with Step 6. Are you the owner of the charging station? Continue with Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!