Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Growatt THOR 11AS installation and user guide
A laptop
A UTP network cable
Follow the steps
Step 1: After installing the charging station, connect it to a computer with a network cable.
Step 2: Open the Start menu and go to Control Panel.
Step 3: Click "Network and Internet" and open the properties of the network you are connected to.
Step 4: Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties".
Step 5: Enter the IP address, subnet mask and default gateway as specified in the Growatt installation guide, then click "OK".
Step 6: Open a web browser and go to http://192.168.1.5:8080/ to open the parameter settings page of the charging station.
Step 7: Change the "Server URL" to: wss://eevee-hvpq.powerfill.app/ws/
Step 8: Click "Set and Reboot" to save. After the restart, the charging station connects to the EEVEE backend if the network settings are correct.
If the charging station uses a SIM card, APN: (TBD)
Are you the installer? Continue with Step 9. Are you the owner of the charging station? Continue with Step 10.
Step 9 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 10 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!