Skip to main content

Connection guide: eNovates

On this page you find the connection guide to connect an eNovates charging station with your EEVEE account.

Configuration requirements

  • Configuration package, containing a SIM card (optional), an EVSE-ID, a configuration guide for the installer and a registration guide for the owner

  • Laptop with Windows

  • UTP cable (RJ45)

Follow the steps

Step 1: Connect the UTP cable to the laptop and to the Ethernet port on the left side of the motherboard of the charging station.

Step 2: Go to the network settings of the laptop and choose Change adapter settings.

Step 3: Right-click the Ethernet connection and choose Properties.

Step 4: Double-click Protocol version 4 (TCP/IPv4).

Step 5: Adjust the network settings (static IP address in the same subnet as the charging station, 192.168.10.x) and click OK.

Step 6: Open a browser and go to http://192.168.10.42:12800/admin/admin.html. You will arrive at the home page of the charging station.

Step 7: Enter the charging station details:

  • ChargePointID: serial number of the charging station or EVSE-ID (as in the EEVEE configuration package)

  • ChargepointModel: model of the charging station

  • ChargeBoxSerialNumber: serial number of the charging station (see grey sticker)

  • ChargepointVendor: eNovates

Step 8: Enter the OCPP settings:

  • OCPP type: OCPP 1.6

  • Endpoint: Other

  • Endpoint URL: wss://eevee-hvpq.powerfill.app/ws/

Connection via SIM card: continue to Step 9. Connection via Ethernet cable: go to Step 10.

Step 9: Connection via SIM card (Network settings)

  • Preset: Simcard

  • Type: Modem

  • APN: (TBD)

  • Username: leave empty

  • Password: leave empty

Click Apply and restart the charging station.

Step 10: Connection via Ethernet (Network settings)

  • Charging station that can set its own IP address:

    • Preset: Ethernet DHCP connection

    • Type: eth0 dhcp

    • ETH0 DHCP: no additional settings

  • Charging station that cannot set its own IP address:

    • Type: eth0 static

    • Enter the static IP settings of your network.

Click Apply and restart the charging station.

Step 11: Go to BackendLink Status. The charging station is connected to the platform when the field shows Online=True.

Step 12 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 13 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!

Did this answer your question?

Related Articles

EEVEE Mobility Help Center