Configuration requirements
EEVEE configuration package, containing:
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
Go-e reset card
Go-e mobile app
Go-eCharger online installation and operating manual
Configuration device: mobile phone
Follow the steps
Step 1: Connect your phone to the charging station. On some devices you first need to turn off mobile data and disconnect from Wi-Fi networks. Use one of the following methods:
Find the hidden QR code and serial number on the charging station and scan the QR code.
Connect manually to the hotspot of the charging station in your phone's settings. The details are on the reset card:
Hotspot name (SSID):
go-e-######Hotspot password (key): printed on the reset card
Step 2: Open the go-e app. If the charging station appears in the app, continue with the configuration. If not, add it via the preferred option in the app.
Step 3: Connect the charging station to your local Wi-Fi: select the "Internet" tab at the bottom of the screen, select the "WiFi" bar and connect the charging station to your local Wi-Fi network.
Step 4: Configure the OCPP settings: go to the "Internet" tab and then "OCPP".
Turn on
OCPP 1.6with the toggle.Set the OCPP server URL to:
wss://eevee-hvpq.powerfill.app/ws/goe######Replace the ###### with the same digits as in the hotspot SSID.
Step 5: Restart the charging station: in the "Internet" tab, select "Reboot".
Are you the installer? Continue with Step 6. Are you the owner of the charging station? Continue with Step 7.
Step 6 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 7 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!