Configuration requirements
Configuration package (SIM card (optional), EVSE-ID, configuration guide for the installer, registration guide for the charging station owner)
Legrand OCPP manual
A connected, working charging station with Communication kit cat. no. 0 590 56
A laptop and an RJ45 cable between the laptop and the communication kit
The latest upgrade package (including OCPP) from the Legrand e-catalogue
Follow the steps
Step 1: Connect to the communication kit in your browser at IP address 162.168.1.200.
Step 2: Log in to the Green'up web interface with the default credentials admin / admin. For a first connection, consult the instruction sheet of the communication kit (LE09802A-XX).
Step 3: After logging in, open the Charging Mode page.
Step 4: Select OCPP as the charging mode. On a double charging station, OCPP is set for both sides.
Step 5: After selecting OCPP, enter the Backoffice URL and the UID of the station:
URL:
wss://eevee-hvpq.powerfill.app/ws/UID: the serial number of the charging station, in the format
Legrand_XXXXXX
Step 6: Click Save, then activate OCPP server connection.
If the IP configuration differs from the default, change the network settings of the communication kit on the Networks page.
If the charging station uses a SIM card:
APN Name: (TBD)
APN User Name: leave blank
APN Password: leave blank
Step 7: Check the Server connection on the OCPP status page. It shows:
Activation: a value of
1means the charging station is trying to connect to the backofficeURL/UID: backoffice connection details
Server connection: connection status
HeartbeatInterval: heartbeat interval (default
60)
If you are the installer, continue to Step 8. If you are the owner of the charging station, continue to Step 9.
Step 8 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!