Skip to main content

Connection guide: IES Synergy KEYWATT

On this page you find the connection guide to connect a IES Synergy KEYWATT charging station with your EEVEE account.

Configuration requirements

  • EEVEE configuration package, containing:

    • SIM card (optional)

    • EVSE-ID

    • Configuration guide for the installer

    • Registration guide for the owner of the charging station

  • IES Synergy user guide

  • InTools QuickGuide IES Synergy

  • Configuration device: laptop

  • Ethernet cable

Follow the steps

Step 1: Check the OCPP version by tapping the info button on the screen of the charging station. If the software is not version V021, contact IES support for an upgrade.

Step 2: Plug the Ethernet cable into one of the two ports on the OCPP card. The web interface is available at:

  • Location 1: 192.168.111.50:8088

  • Location 2: 192.168.254.50:8088

Step 3: Set the network settings of your PC: go to Control Panel → Network and Internet → Ethernet → Properties → Internet Protocol Version 4 (TCP/IPv4) and set the IP address of the PC to:

  • Location 1: 192.168.111.100

  • Location 2: 192.168.254.100

Step 4: Open the web interface by entering the IP address of the charging station in your browser.

Step 5: Once the web interface is open, log in to the program with one of the following passwords:

  • OPERATOR: iamoperator

  • INSTALLER: iaminstaller

  • PROVIDER: iamadmin

Step 6: Select Connectivity Setup in the InTools interface to start the configuration.

Step 7: Configure the backend settings:

  • Protocol Type: JSON

  • Identification address: wss://eevee-hvpq.powerfill.app/ws/

  • Port Listened: 8080

  • Charger Identifier: the unique serial number of the charging station

  • Authorize When Offline Full: false

Step 8: Configure the communication settings:

  • Modem (SIM) APN (if the charging station uses a SIM card): (TBD)

  • APN username and APN password: (TBD)

  • Ethernet: use DHCP for automatic IP assignment, or Static IP for a manually set address.

Step 9: Review the Summary and save via the Validation menu.

The charging station restarts and connects to the EEVEE platform if the backend and network settings are correct.

If you are the installer, continue with Step 10. If you are the owner, continue with Step 11.

Step 10 (installers): Activate the charging station on the EEVEE platform: (TBD)

Step 11 (owners): Register the charging station in your EEVEE account: (TBD)

The charging station is now linked to your EEVEE account!

Did this answer your question?

Related Articles

EEVEE Mobility Help Center