Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE ID
Configuration manual for the installer
Registration manual for the owner of the charging station
Rolec Zura online Installation & Operation Manual
Rolec configuration process video
Rolec EV Connect app
Configuration device: smartphone with camera, QR code reader, Bluetooth and internet access
Follow the steps
This guide describes how to connect a Rolec Zura charger to EEVEE.
Step 1: Installation – Make sure the charge point has been installed safely according to the Rolec Zura installation manual.
Step 2: Get the app – Install the Rolec EV Connect app from the Apple App Store or Google Play Store, by scanning the QR code on the configuration tag or via rolecevconnect.com.
Note: keep the configuration tag, as the small QR code label on it is needed later. If the tag is missing, a copy of the QR code can be found inside the charge point enclosure, attached to the communications module.
Step 3: Power up – Power the charge point and wait for it to start up. The LED flashes blue when it is ready.
Step 4: Scan the ID – Open the app, tap the owner icon and scan the charge point ID QR code on the configuration tag.
Step 5: Bluetooth – After scanning, connect to the charge point via Bluetooth.
Step 6: Connect – Tap Connect. After a few seconds the configuration screen appears.
Step 7: Enter settings – Fill in each field of the form and enter the endpoint URL:
wss://eevee-hvpq.powerfill.app/ws/
Note: if the charging station uses a SIM card, APN: (TBD)
Note: do NOT change the Charge Point ID. Changing it removes connectivity to the charge point.
Step 8: Save – At the end of the form, tap Set to save the entries.
Step 9: Close – On the next screen, tap Close to finish the EV Connect configuration.
Are you an installer? Continue with Step 10. Are you the owner of the charging station? Continue with Step 11.
Step 10 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 11 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!