Configuration requirements
EEVEE configuration package, containing:
SIM card (optional)
EVSE-ID
Configuration guide for the installer
Registration guide for the owner of the charging station
GL Charge online installation manual
A laptop for the configuration
An Ethernet cable
Follow the steps
Step 1: Connect the laptop to the charging station with an Ethernet cable.
Step 2: Set the IP address of the laptop to 192.168.1.3 with subnet mask 255.255.255.0.
Step 3: Open a web browser and go to http://192.168.1.2.
Step 4: Log in with:
Username:
installerPassword:
installer
Step 5: In the web interface, choose Ethernet or GSM as the priority connection and configure it:
Ethernet: in the Ethernet tab, choose DHCP (automatic IP) or static IP (enter IP address, subnet mask, gateway and DNS servers manually). Save.
GSM: in the GSM tab, if the charging station uses a SIM card, set the APN, PIN, username and password: (TBD). Save.
You can configure both Ethernet and GSM. The charging station uses the primary connection by default and switches to the secondary connection if the primary one is unavailable.
Step 6: In the OCPP tab, enter:
Host address:
wss://eevee-hvpq.powerfill.app/ws/Charge Point Identity: the serial number of the charging station
Security settings: not required
Step 7: Click "Save" and then click "Restart OCPP" to connect to the central system.
Are you the installer? Continue with Step 8. Are you the owner of the charging station? Continue with Step 9.
Step 8 (installers): Activate the charging station on the EEVEE platform: (TBD)
Step 9 (owners): Register the charging station in your EEVEE account: (TBD)
The charging station is now linked to your EEVEE account!